- No products in the cart.
Orange
Apex Prototyping – Gavin’s Bananus – Toestop
$7.99CADApex Prototyping – Gavin Rutherford Bananus – Footstop Toestop
Designed to improve contact with your grip and control of your board.
Most shoes have a slight rocker which means you have to fight the shape of your shoe to get proper contact with your board. Gavin Rutherford designed this curved wedge for your toeside to help fill that space on your front foot, or to use it as a spot to feel if your rear foot is in the right spot and to hold it in place in a corner or slide.
Made out of 90a urethane meant to be glued to your deck under your griptape.
Individually sold.
Riptide – Slab – Footstop
$31.99CADRiptide Footstop SLAB Urethane Downhill Longboarding Toestop
Riptide SLAB Custom 60d Urethane Longboard footstops are light weight, durable, and come with 3 Delrin disks so that you can customize both the angle and the height to your personal fit. Riptide Slab foot stop developed jointly with Ambroise Trauet (record holder for the fastest toeside stand up slide in the world with 117.35Km/h). Currently available in Black, Purple, Wine Red, Orange, Green, Pink, Yellow, Blue.
Individually sold and includes –
⦁ SLAB Footstop
⦁ Three (3) Delrin disks to adjust height and angle
⦁ Tiny washer
⦁ 1.75″ Bolt & Nut
⦁ Custom 60d Urethane
⦁ Durable
⦁ Height 1.3″
⦁ Width 2.75″
⦁ Lightweight 1.6 oz / 46 gmThe longer bolt and 3 delrin disks allow you to edit the height of the footstop off your board for foot comfort.
Riptide – PSD Footstop – Aer-Out
$26.99CADRiptide – PSD Footstop – Aer-Out foot stop downhill longboarding
⦁ Conforms to fit the concave of your board
⦁ Custom 60d Urethane
⦁ Durable
⦁ Lightweight 1.7 oz / 48 gm
⦁ Length: 1.95″ / 49.5 mm
⦁ Width: 3.55″ / 90.1 mm
⦁ Height: .98″ / 24.9 mm
⦁ Slot Length: .75″ / 19.0 mmRiptide – PSD Footstop – KoMotion
$13.99CAD⦁ Conforms to fit the concave of your board
⦁ Custom KranK 95a Urethane so your toe will ‘mold’ slightly against the cog to help prevent slipping
⦁ Durable
⦁ Super Lightweight: .25 oz / 7 gm
⦁ Diameter: 1.00″ / 25.4 mm
⦁ Height: .76″ / 19.3 mm
⦁ 7 Fun Colors to choose from!Sold Individually with a washer, 1.75″ bolt, nut, PSD sticker & a RipTide sticker.
Orangatang – Moose Knuckles Bushings
$21.99CADJUICIER BOUNCE, TIGHTER PACKAGE.
Crafted for quick turning response and smooth edge-to-edge transitions, Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding.Orange = Soft
Purple = MediumWhat’s in the box? Pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers.
LONGBOARD BUSHING SPECS
Diameter: 0.95” (24.1 mm)
Height (gumdrop): 0.64” (16.3 mm)
Height (inset barrel) 0.59” (15 mm) barrel + 0.075” (1.91 mm) insert = 0.665” (16.9 mm) total
Formula: Randy Thane
Durometers: soft (orange, 87a), medium (purple, 90a)RECOMMENDED WEIGHT RANGES
Soft: 65-190+ lbs / 29-86+ kg
Medium: 130-230+ lbs / 59-104+ kgOrangatang – Nipples Bushings
$21.99CADIs it cold in here or are you just sporting some perky bushings? Stuff these chubby puppies into your trucks and get ready to bounce out of every carve with tons of energy and rebound. Poured with our extra lively and energetic Randy Urethane, which we came upon while testing wheels but had slide characteristics that were a bit hmmmmm . . . premature? Too eager for a wheel, but just excitable enough to squeeze between your washers.
Sold as a set of four (4), including four thin and strong flat washers. Nipples are NOT recommended for every truck on the market, but they do work well with Paris, Tracker Fastracks and Randals (among others).
