73a

  • Seismic – Defcon Standard .60 Short Barrel – Bushings

    $15.99CAD

    Seismic Skate – Defcon Standard Short Barrel 0.60-inch (15mm) – Bushings

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)

    73A – Cloud White
    77A – Sunray
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape
    97A – Midnight

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    See Options

  • Seismic – Defcon Standard .60 Short Barrel Bushings – Bundle Pack

    $69.99CAD

    Seismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) Bushings – Bundle Pack

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)

    Includes:
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    Add to cart

  • Seismic – Defcon Standard .75 Tall Barrel – Bushings

    $17.99CAD

    Seismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) – Bushings

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Tall 0.75-inch (19mm): Optimal height for most specialty race trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    73A – Cloud White
    77A – Sunray
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape
    97A – Midnight

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    See Options

  • Seismic – Defcon Standard .75 Tall Barrel Bushings – Bundle Pack

    $79.99CAD

    Seismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) Bushings – Bundle Pack

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Tall 0.75-inch (19mm): Optimal height for most specialty race trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    Includes:
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    Add to cart

  • Seismic – Defcon Standard .65 Medium Barrel Bushings – Bundle Pack

    $69.99CAD

    Seismic Skate – Defcon Standard Medium Barrel 0.65-inch (16.5mm) Bushings – Bundle Pack

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Medium 0.65-inch (16.5mm): Optimal height for most modern longboard trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    Includes:
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    Add to cart

  • Seismic – Defcon Standard .65 Medium Barrel – Bushings

    $15.99CAD

    Seismic Skate – Defcon Standard Medium Barrel 0.65-inch (16.5mm) – Bushings

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Medium 0.65-inch (16.5mm): Optimal height for most modern longboard trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    73A – Cloud White
    77A – Sunray
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape
    97A – Midnight

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    See Options

  • Khiro Bushings – Built in Washer

    $8.00CAD

    The built in washer reduces slop and ensures an even pressure on your bushing.

    See Options
  • On Sale

    Khiro Bushings – Double Barrel

    $9.00 $5.00CAD

    Khiro Double Barrel Bushings come in seven different durometers; Extra Soft White 73A, Mild Soft Orange 79A, Soft Blue 85A, Med Soft Red 90A (Sold Out), Hard Black 95A and Extra Hard Purple 98A.

    Note: The X-Soft White Bushings are 73-A hardness, designed for light discipline and lightweight skaters.

    See Options

  • Khiro Bushings – Tall Cone

    $8.00CAD

    Like all KHIRO bushings, these ‘Tall Cone’ Bushings come in seven different durometers; Extra Soft White 73A, Mild Soft Orange 79A, Soft Blue 85A, Med Soft Red 90A, Hard Black 95A and Extra Hard Purple 98A.

    Note: The X-Soft White Bushings are 73-A hardness, designed for light discipline and lightweight skaters.

    See Options