93a

  • Seismic – Defcon Standard .60 Short Barrel – Bushings

    $15.99CAD

    Seismic Skate – Defcon Standard Short Barrel 0.60-inch (15mm) – Bushings

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)

    73A – Cloud White
    77A – Sunray
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape
    97A – Midnight

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    See Options

  • Seismic – Defcon Standard .60 Short Barrel Bushings – Bundle Pack

    $69.99CAD

    Seismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) Bushings – Bundle Pack

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)

    Includes:
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    Add to cart

  • Venom – Bushings – Eliminator (HPF)

    $14.99CAD

    Venom – Bushings – Eliminator (HPF)

    This bushing is our way of paying homage to what is, if we’re honest, one of the greatest bushings of all time: The Tracker Stimulator. The stepped out design lets you put a lot more urethane under your feet. The result of this, is you can run a softer duro and still maintain the same stability. In short, more turn, less wob, and more rebound from all the extra bushing. The Eliminator is also specifically designed to accommodate precision trucks with spherical bearings. One side of the bushing has an indented “dish” to prevent contact with the bearing that causes twitch.

    Made In USA

    HPF Formula:
    78A – Blue
    81A – Orange
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark
    97A – Pink

    See Options

  • Venom – Bushings – Caliber Plug Downhill Barrels (HPF)

    $14.99CAD

    Venom – Bushings – Caliber Plug Downhill Barrels (HPF)

    The new Venom Plug Barrel Bushings for Caliber Trucks are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. This results in a quicker return to center, increased responsiveness, and a more direct turning feel over a traditional barrel bushing.

    Each pack comes with 1 Plug Barrel Bushing and a regular Barrel in the same durometer.

    Made In USA

    HPF Formula:
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark

    See Options

  • Venom – Bushings – Barrical Freeride (HPF)

    $14.99CAD

    Venom – Bushings – Barrical Freeride (HPF)

    More stable than a barrel and less restrictive than an Eliminator, the Venom freeride bushing has a wide, stepped design that can be flipped for different turning response. For extra stability and a more defined center, put the wide end toward the hangar. For deep turning and juicy rebound, run the narrower end in the hangar. Either way, it’s ideal for going fast and doing big slides.

    Made In USA

    HPF Formula:
    78A – Blue
    81A – Orange
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark
    97A – Pink

    DIMENSIONS:
    Height: ~15.50mm
    Step Diameter (into bushing seat): ~25.30mm
    Max Diameter (out of bushing seat): ~30mm
    Inner Diameter: ~9.50mm

    See Options

  • Seismic – Defcon Standard .75 Tall Barrel – Bushings

    $17.99CAD

    Seismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) – Bushings

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Tall 0.75-inch (19mm): Optimal height for most specialty race trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    73A – Cloud White
    77A – Sunray
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape
    97A – Midnight

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    See Options

  • Seismic – Defcon Standard .75 Tall Barrel Bushings – Bundle Pack

    $79.99CAD

    Seismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) Bushings – Bundle Pack

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Tall 0.75-inch (19mm): Optimal height for most specialty race trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    Includes:
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    Add to cart

  • Seismic – Defcon Standard .65 Medium Barrel Bushings – Bundle Pack

    $69.99CAD

    Seismic Skate – Defcon Standard Medium Barrel 0.65-inch (16.5mm) Bushings – Bundle Pack

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Medium 0.65-inch (16.5mm): Optimal height for most modern longboard trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    Includes:
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    Add to cart

  • Seismic – Defcon Standard .65 Medium Barrel – Bushings

    $15.99CAD

    Seismic Skate – Defcon Standard Medium Barrel 0.65-inch (16.5mm) – Bushings

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Medium 0.65-inch (16.5mm): Optimal height for most modern longboard trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    73A – Cloud White
    77A – Sunray
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape
    97A – Midnight

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

    See Options

  • Venom – Bushings – Tall Kegs (HPF)

    $16.99CAD

    Venom – Bushings – Tall Kegs (HPF)

    The “keg” bushing is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. The curved side profile provides extra meat while still fitting most bushing seats. Ideal for use on the board-side, especially if you’re looking for a softer-feeling setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. Only compatible with Tall-bushing trucks.

    Made In USA

    HPF Formula:
    78A – Blue
    81A – Orange
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark
    97A – Pink

    DIMENSIONS:
    Height: ~18.70mm
    Step Diameter (into bushing seat): ~25.10mm
    Max Diameter (out of bushing seat): ~31.40mm
    Inner Diameter: ~9.50mm

    See Options

  • Venom – Rogue Insert Bushings

    $10.99CAD

    Venom Bushings Rogue Truck Urethane Insert Bushings

    Precision Urethane Insert Bushings from Venom for Rogue Trucks

    85a, 87a, 90a, 93a, 95a, 97a durometers

    See Options

  • Venom – Bushings – Tall Barrel (HPF)

    $14.99CAD

    Yet, another addition to the Venom family, this taller Venom barrel bushing has been designed to fit tall-bushing-compatible trucks like Rogues, Ronins, Bear Kodiaks, Arsenal, etc. Them same tried and true Venom barrel shape you all know and love, just scaled up for maximum stability and dive. Try them out and enjoy!

    Made In USA

    HPF Formula:
    73A – Light Pink
    78A – Blue
    81A – Orange
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark
    97A – Pink

    See Options

  • Venom – Bushings – Barrels (HPF)

    $12.99CAD

    Venom – Bushings – Barrels (HPF)

    Plain and simple, the Downhill Double-Barrel Pack is built for speed. Double barrels, teamed with cup washers can give your setup that fully locked in feel that gives you the confidence you need to grab some serious velocity. Barrels: .6″ tall x .97″ wide

    Made In USA

    HPF Formula:

    73A – Light Pink
    78A – Blue
    81A – Orange
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark
    97A – Pink

    See Options

  • Powell Peralta – Bones Hardcore – Barrel Bushings

    $21.99CAD

    Powell Peralta Bones Hardcore Barrel Bushings

    Duro: 85, 88, 90, 93, 95, 97

    Here’s what it says on the package, and they don’t appear to be lying either:

    -Patented bonded-insert technology
    -More precise steering
    -Quicker response
    -No break-in period
    -More stability
    -The BEST bushings, period.

    See Options