- No products in the cart.
Valkyrie Truck Co. – MK3 Slalom Wheelbite Blocker
$6.99CADValkyrie Truck Co. – MK3 Slalom Wheelbite Blocker
95a Urethane sleeve sits at the base of your kingpin and prevents wheelbite for most setups. Highly recommended for LDP where soft bushings are common and riders seek to get every bit of steering out of their trucks.
Blockers are sold as a single unit. No other parts included.
Seismic – Fullspin Precision Profiled XT Steel – Bearing Spacers
$13.99CADFullspin™ Precision-Profiled XT™ Steel Spacers
Premium 0.400-inch steel bearing spacers. Fit standard 8mm axles only.
Fullspin’s unique Precision-Profiled XT (Extra-Tough) Steel Spacers have broad flanged ends that square up against Classic (non-Built-In) inner ring surfaces with up to 67% more contact area – powering unprecedented Classic alignment precision and stability.
Design levels and steadies all working components of seated bearings far more precisely and stably than Classic spacers from other brands – which are typically rough-cut from thin-walled, easily-bent iron or aluminum, with oversized bores that rock on axles.
This is hands-down the most advanced Classic bearing alignment tech ever seen in the skate world, and it unleashes truly exceptional paired performance. Synergizes with working features in all high-quality Classic bearings* to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
Precision-machined from premium bearing steel with advanced heat-treatment for unmatched strength and toughness.
Spacer width set to extra-strict 0.400-inch tolerance, to support highly accurate positioning of paired bearings inside finer wheels with well-engineered hubs.
Radius reduced to bare minimum on spacer edges, for fuller contact and more stable alignment at bearing interfaces. Bore specs dialed to maintain exceptional straightness on finer axles.
* For best results, use with Seismic® Fullspin Classic bearings, which have extra-wide inner ring contact surfaces that exactly match the profiled spacer ends.
Loaded – Tangent Platform – Deck
$229.99CADLoadedLoaded Fathom Platform Deck Long Distance Longboard
* Platform Deck only, Not a complete. Will need additional parts to complete.
LONGBOARD SPECS
• Length: 26″ / 66.0 cm (deck)
• Width: 9.75″ / 24.8 cm
• Wheelbase: 20.25″ / 51.4 cm (deck)
• Profile: slight rocker
• Flex: subtle
• Weight: 4.3 lb / 2.0 kg (deck)*Designed for riders up to 300 lb / 136 kg under normal use. Riders 300-350 lb / 136-159 kg should minimize aggressive pumping.
CONSTRUCTION
Maple and basalt composite construction provides lightweight durability while also ensuring a smooth ride thanks to a subtle, long-lasting damp flex. Coarser griptape at the ends relays tactile feedback for intuitive foot positioning.Independent Trucks – Diamond Plate – 1in Blue/Black Phillips
$4.99CADIndependent Trucks – Diamond Plate – 1in Blue/Black Phillips Hardware
Genuine Parts Precision bolts are specified to the highest standards with full size diamond plate heads and extended unthreaded shafts for minimal board damage and nylon lock nuts.
Guaranteed not to break.
Each set contains 8 Blue bolts & nuts and 2 black, laser engraved tool, decal, & recyclable packaging.
Independent Trucks – Diamond Plate – 1in Black/Red Phillips
$4.99CADIndependent Trucks – Diamond Plate – 1in Black/Red Phillips Hardware
Genuine Parts Precision bolts are specified to the highest standards with full size diamond plate heads and extended unthreaded shafts for minimal board damage and nylon lock nuts.
Guaranteed not to break.
Each set contains 8 red bolts & nuts and 2 black, laser engraved tool, decal, & recyclable packaging.
Loaded – Fathom Complete – 105mm 80a Dad Bods
$529.99CADLoaded X G-Bomb Fathom Complete Zee Bracket Mounting System With Paris 150mm and 105mm 80a Dad Bods Complete
Introducing the Loaded Fathom, the longboard that blurs the boundaries of what a skateboard can be.
The Fathom is one of the easiest boards to ride in the world and a ton of fun. Built around the new Loaded Zee Bracket truck mounting system. With large wheels and a low ride height, the Fathom reimagines soulful commuting and urban exploration.
LONGBOARD SPECS
• Length: 33″ / 83.8 cm (complete), 23″ / 58.4 cm (deck)
• Width: 9.25″ / 23.5 cm
• Wheelbase: 26.5″ / 67.3 cm (complete), 17.25″ / 43.8 cm (deck)
• Profile: slight camber
• Flex: subtle
• Weight: 9.6 lb / 4.4 kg (Dad Bod), 8.4 lb / 3.8 kg (Caguama), 3.1 lb / 1.4 kg (deck)
• Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.COMPLETE SETUP
• Bracket: Loaded Zee Bracket (NEW)
• Trucks: Paris V2 150mm 50° (raw)
• Wheels: Orangatang 105mm Dad Bod (80a, orange)
• Bearings: Loaded Jehu V2
• Hardware: Loaded (two sets: 1.25″ at deck, 1″ at trucks)Rocket – Gravity Plate – Board Weight
$89.99CADRocket Longboards – 3lb Gravity Plate – Board Weight
The Gravity Plate Kit includes:
1 Gravity Plate of 3lbs / 1.35 kg
1 bamboo riser, 20mm
2 stainless steel bolts in length of 1.25″
2 stainless steel bolts in length of 2″
2 nylock nuts
1 positioning template
1 drilling template (the plate itself)Waterborne – Surf Skate Adapter And Rail Pack Black – Surf Skate
$129.99CADWaterborne – Surf Skate Adapter And Rail Pack Black – Surf Skate
The Surf Adapter™ on your front truck gives your board the tight carving ability that you need for surf training or surfstyle riding. The rear truck Rail Adapter gives a skateboards rear truck, whether it’s traditional kingpin or reverse kingpin, more lean. A skateboard with both the Surf and Rail Adapters feels so buttery smooth because you are separated from the ground by vibration dampening urethane bushings. It feels like there are cushions under both feet, lending the board to confidently turn tightly even on rough concrete.
The combination of Surf and Rail Adapter makes a skateboard much more stable at high speed that traditional skateboard trucks alone. They effectively eliminate speed wobbles by making the front wheels trail a leading pivot, just like the suspension on a car. The rear truck becomes much less squirrelly because the Rail Adapter stabilizes it’s turning and makes the function of the rear truck all about grip. The board will feel very natural even at speed making drawn out carves.
All hardware necessary for installation is included.
Maximize performance of any skateboard, longboard, or drop-through board and all types of trucks to give a riding sensation that is true to surfing.
Carve fluidly with 3x tighter turns.
Carry more speed as optimal deck articulation across the front and rear trucks allow all 4 wheels grip harder around curves.
Pump faster with less effort.
Customize your Surf Adapter Bushings, and your Rail Adapter Bushings.
Installs easily to your existing trucks.Loaded – Fathom Platform – Deck
$179.99CADLoadedLoaded Fathom Platform Deck Long Distance Longboard
* Platform Deck only, Not a complete. Will need additional parts to complete.
LONGBOARD SPECS
• Length: 23″ / 58.4 cm (deck)
• Width: 9.25″ / 23.5 cm
• Wheelbase: 17.25″ / 43.8 cm (deck)
• Profile: slight camber
• Flex: subtle
• Weight: 3.1 lb / 1.4 kg (deck)CONSTRUCTION
Featuring 8-ply maple construction, slight camber for road-smoothing suspension, and lifted corners (with more aggressive grip tape) to lock in your feet and reduce the chance of foot bite. Large enough for comfort but compact enough to carry on public transportation and stow under your desk.Loaded – Fathom Complete – 85mm 77a Caguama
$469.99CADLoaded X G-Bomb Fathom Complete Zee Bracket Mounting System With Paris 150mm and 85mm 77a Caguama Complete
Introducing the Loaded Fathom, the longboard that blurs the boundaries of what a skateboard can be.
The Fathom is one of the easiest boards to ride in the world and a ton of fun. Built around the new Loaded Zee Bracket truck mounting system. With large wheels and a low ride height, the Fathom reimagines soulful commuting and urban exploration.
LONGBOARD SPECS
• Length: 33″ / 83.8 cm (complete), 23″ / 58.4 cm (deck)
• Width: 9.25″ / 23.5 cm
• Wheelbase: 26.5″ / 67.3 cm (complete), 17.25″ / 43.8 cm (deck)
• Profile: slight camber
• Flex: subtle
• Weight: 9.6 lb / 4.4 kg (Dad Bod), 8.4 lb / 3.8 kg (Caguama), 3.1 lb / 1.4 kg (deck)
• Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.COMPLETE SETUP
• Bracket: Loaded Zee Bracket (NEW)
• Trucks: Paris V2 150mm 50° (raw)
• Wheels: 85mm Caguama (77a, blue)
• Bearings: Loaded Jehu V2
• Hardware: Loaded (two sets: 1.25″ at deck, 1″ at trucks)Loaded X G-Bomb Zee Bracket Mounting System
$79.99CADLoaded X G-Bomb Zee Bracket Mounting System
Contents: two (2) Zee Brackets, eight (8) O-rings
Features:
Lowers ride height by about 1.5″ / 3.8 cm compared to a top mounted skateboard
Big Wheels: accommodates wheels between 75 and 105 mm with no wheelbite
Super Stiff: made from fiber-reinforced automotive-grade resin
Vibration Damping: Eight urethane O-ring vibration dampers (four per bracket)
Trucks: Works with a variety of trucks between 150 and 180 mm. Reverse Kingpin (like Paris, Bear, Caliber) recommended. Works with standard street decks using existing truck mounting holes.Recommended equipment:
Big Wheels (75-105mm)
Reverse Kingpin Trucks (150-180mm)
Bearings
Skate Hardware (two sets)
Griptape
Deck: Create your own deck out of an old street deck, a longboard deck, an old snowboard, a plank of wood, your mom’s priceless coffee table, etc.Dimensions:
Length: 8.25″ / 21.0 cm
Width: 3.25″ / 8.26 cm
Height: 2.25″ / 5.72 cm
Weight (pair): 0.875 lb / 0.4 kg
Two Zee Brackets add 9.25″ / 23.5 cm to deck wheelbase
Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.Loaded – Counter Sunk – Hardware
$9.99CADLoaded – Counter Sunk – Hardware
Got that sinking feeling again? We’ll only make it worse. Loaded countersunk (flat head) hardware. The strongest bolts in the world. Period.
Based on research into steel technology and tons of testing, we’ve built the strongest bolts ever. These things don’t break. Guaranteed.
We’ve got little bumps (debossed or embossed, we’re not sure which is which) on top to further stick you to your deck. Guaranteed to smell like grease.
Our hardware comes with a hex key and is available in three sizes!
1”
1.25”What’s in the box? 8 bolts, 8 nuts, and a wrench.
Packaging may vary.
Loaded – Button Head – Hardware
$9.99CADLoaded – Button Head – Hardware
The strongest bolts in the world. Period.
Based on research into steel technology and tons of testing, we’ve built the strongest bolts ever. These things don’t break. Guaranteed.
These button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.
Our hardware comes with a hex key and is available in three sizes!
1”
1.25”
1.5″
What’s in the box? 8 bolts, 8 nuts, and a hex key to tighten them down.Packaging may vary.
Seismic – Split Angled Wedges – Risers
$21.99CADSeismic Skate – Split Angled Wedges – Truck Risers
Precision-Machined • Ultra-Low Profile • Easy to Stack!
Package of one (1) 3-degree Riser and one (1) 7-degree Riser.
Packaged in pairs of one (1) 3-degree Riser and one (1) 7-degree Riser, with an advanced feature set never before seen in combination…
• Thin ends reduced to 0.5mm-thickness for lowest-possible profile.
• Mounting hole dimensions highly optimized for easy stacking. No more bent bolts from riser hole misalignment!*
• Biomimetic “honeycomb” structure maximizes support with minimal material.
• CNC-machined from tough composite with superior dimensional stability. Highly resistant to deformation from extreme loads and impacts.Independent Trucks – Cross Bolts – 1in Black/Red Phillips
$4.99CADIndependent Genuine Parts hardware is specified to the highest standards. Each set contains 6 black bolts and 2 red bolts. Genuine Parts Phillips hardware features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage. Available in black, silver, gold and red. 1.25″ and & 1.5″. Updated packaging features 100% recyclable bolt bags.
Independent Trucks – Cross Bolts – 1in Black Allen
$4.99CADIndependent Genuine Parts hardware is specified to the highest standards. Each set features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage. Allen Head available in black 7/8 and & 1″. Updated packaging features 100% recyclable bolt bags.
