• Riptide Carver CX Surfskate Bushings Pivot Cups – 96a

    $16.99CAD

    Riptide Carver CX Surfskate Bushings Pivot Cups – 96a

    Sold as Pair.

    – Specifically designed for each truck
    – Lively & Responsive
    – Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
    – No machining imperfections and no heat-affected zone in the super smooth pivot contact area
    – RipTide’s exclusive Internally Lubricated WFB Urethane in 96a

  • Waterborne – Surf Skate Adapter And Rail Pack Black – Surf Skate

    $129.99CAD

    Waterborne – Surf Skate Adapter And Rail Pack Black – Surf Skate

    The Surf Adapter™ on your front truck gives your board the tight carving ability that you need for surf training or surfstyle riding. The rear truck Rail Adapter gives a skateboards rear truck, whether it’s traditional kingpin or reverse kingpin, more lean. A skateboard with both the Surf and Rail Adapters feels so buttery smooth because you are separated from the ground by vibration dampening urethane bushings. It feels like there are cushions under both feet, lending the board to confidently turn tightly even on rough concrete.

    The combination of Surf and Rail Adapter makes a skateboard much more stable at high speed that traditional skateboard trucks alone. They effectively eliminate speed wobbles by making the front wheels trail a leading pivot, just like the suspension on a car. The rear truck becomes much less squirrelly because the Rail Adapter stabilizes it’s turning and makes the function of the rear truck all about grip. The board will feel very natural even at speed making drawn out carves.

    All hardware necessary for installation is included.

    Maximize performance of any skateboard, longboard, or drop-through board and all types of trucks to give a riding sensation that is true to surfing.
    Carve fluidly with 3x tighter turns.
    Carry more speed as optimal deck articulation across the front and rear trucks allow all 4 wheels grip harder around curves.
    Pump faster with less effort.
    Customize your Surf Adapter Bushings, and your Rail Adapter Bushings.
    Installs easily to your existing trucks.

  • Mob – Slayer Logo Clear – Griptape

    $18.99CAD

    Mob Grip – Slayer Logo Clear – Skateboard Griptape Grip Tape

    9″ x 33″, perfect for your regular sized skateboard.

  • Mob – Slayer Pentagram Clear – Griptape

    $18.99CAD

    Mob Grip – Slayer Pentagram Clear – Skateboard Griptape Grip Tape

    9″ x 33″, perfect for your regular sized skateboard.

  • Loaded – Fathom Platform – Deck

    $179.99CAD

    LoadedLoaded Fathom Platform Deck Long Distance Longboard

    * Platform Deck only, Not a complete. Will need additional parts to complete.

    LONGBOARD SPECS
    • Length: 23″ / 58.4 cm (deck)
    • Width: 9.25″ / 23.5 cm
    • Wheelbase: 17.25″ / 43.8 cm (deck)
    • Profile: slight camber
    • Flex: subtle
    • Weight: 3.1 lb / 1.4 kg (deck)

    CONSTRUCTION
    Featuring 8-ply maple construction, slight camber for road-smoothing suspension, and lifted corners (with more aggressive grip tape) to lock in your feet and reduce the chance of foot bite. Large enough for comfort but compact enough to carry on public transportation and stow under your desk.

  • Loaded – Fathom Complete – 85mm 77a Caguama

    $469.99CAD

    Loaded X G-Bomb Fathom Complete Zee Bracket Mounting System With Paris 150mm and 85mm 77a Caguama Complete

    Introducing the Loaded Fathom, the longboard that blurs the boundaries of what a skateboard can be.

    The Fathom is one of the easiest boards to ride in the world and a ton of fun. Built around the new Loaded Zee Bracket truck mounting system. With large wheels and a low ride height, the Fathom reimagines soulful commuting and urban exploration.

    LONGBOARD SPECS
    • Length: 33″ / 83.8 cm (complete), 23″ / 58.4 cm (deck)
    • Width: 9.25″ / 23.5 cm
    • Wheelbase: 26.5″ / 67.3 cm (complete), 17.25″ / 43.8 cm (deck)
    • Profile: slight camber
    • Flex: subtle
    • Weight: 9.6 lb / 4.4 kg (Dad Bod), 8.4 lb / 3.8 kg (Caguama), 3.1 lb / 1.4 kg (deck)
    • Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.

    COMPLETE SETUP
    • Bracket: Loaded Zee Bracket (NEW)
    • Trucks: Paris V2 150mm 50° (raw)
    • Wheels: 85mm Caguama (77a, blue)
    • Bearings: Loaded Jehu V2
    • Hardware: Loaded (two sets: 1.25″ at deck, 1″ at trucks)

  • Loaded X G-Bomb Zee Bracket Mounting System

    $79.99CAD

    Loaded X G-Bomb Zee Bracket Mounting System

    Contents: two (2) Zee Brackets, eight (8) O-rings

    Features:

    Lowers ride height by about 1.5″ / 3.8 cm compared to a top mounted skateboard
    Big Wheels: accommodates wheels between 75 and 105 mm with no wheelbite
    Super Stiff: made from fiber-reinforced automotive-grade resin
    Vibration Damping: Eight urethane O-ring vibration dampers (four per bracket)
    Trucks: Works with a variety of trucks between 150 and 180 mm. Reverse Kingpin (like Paris, Bear, Caliber) recommended. Works with standard street decks using existing truck mounting holes.

    Recommended equipment:

    Big Wheels (75-105mm)
    Reverse Kingpin Trucks (150-180mm)
    Bearings
    Skate Hardware (two sets)
    Griptape
    Deck: Create your own deck out of an old street deck, a longboard deck, an old snowboard, a plank of wood, your mom’s priceless coffee table, etc.

    Dimensions:
    Length: 8.25″ / 21.0 cm
    Width: 3.25″ / 8.26 cm
    Height: 2.25″ / 5.72 cm
    Weight (pair): 0.875 lb / 0.4 kg
    Two Zee Brackets add 9.25″ / 23.5 cm to deck wheelbase
    Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.

  • Venom – Bushings – Eliminator (HPF)

    $14.99CAD

    Venom – Bushings – Eliminator (HPF)

    This bushing is our way of paying homage to what is, if we’re honest, one of the greatest bushings of all time: The Tracker Stimulator. The stepped out design lets you put a lot more urethane under your feet. The result of this, is you can run a softer duro and still maintain the same stability. In short, more turn, less wob, and more rebound from all the extra bushing. The Eliminator is also specifically designed to accommodate precision trucks with spherical bearings. One side of the bushing has an indented “dish” to prevent contact with the bearing that causes twitch.

    Made In USA

    HPF Formula:
    78A – Blue
    81A – Orange
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark
    97A – Pink

  • Venom – Bushings – Caliber Plug Downhill Barrels (HPF)

    $14.99CAD

    Venom – Bushings – Caliber Plug Downhill Barrels (HPF)

    The new Venom Plug Barrel Bushings for Caliber Trucks are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. This results in a quicker return to center, increased responsiveness, and a more direct turning feel over a traditional barrel bushing.

    Each pack comes with 1 Plug Barrel Bushing and a regular Barrel in the same durometer.

    Made In USA

    HPF Formula:
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark

  • Venom – Bushings – Barrical Freeride (HPF)

    $14.99CAD

    Venom – Bushings – Barrical Freeride (HPF)

    More stable than a barrel and less restrictive than an Eliminator, the Venom freeride bushing has a wide, stepped design that can be flipped for different turning response. For extra stability and a more defined center, put the wide end toward the hangar. For deep turning and juicy rebound, run the narrower end in the hangar. Either way, it’s ideal for going fast and doing big slides.

    Made In USA

    HPF Formula:
    78A – Blue
    81A – Orange
    85A – Yellow
    87A – Purple
    90A – Red
    93A – Green
    95A – Glow in the Dark
    97A – Pink

    DIMENSIONS:
    Height: ~15.50mm
    Step Diameter (into bushing seat): ~25.30mm
    Max Diameter (out of bushing seat): ~30mm
    Inner Diameter: ~9.50mm

  • Riptide – Charger I Pivot Cups – 96a

    $16.99CAD

    Riptide – Charger I Pivot Cups – 96a

    Sold as Pair.

    – Specifically designed for each truck
    – Lively & Responsive
    – Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
    – No machining imperfections and no heat-affected zone in the super smooth pivot contact area
    – RipTide’s exclusive Internally Lubricated WFB Urethane in 96a

  • Loaded – Counter Sunk – Hardware

    $9.99CAD

    Loaded – Counter Sunk – Hardware

    Got that sinking feeling again? We’ll only make it worse. Loaded countersunk (flat head) hardware. The strongest bolts in the world. Period.

    Based on research into steel technology and tons of testing, we’ve built the strongest bolts ever. These things don’t break. Guaranteed.

    We’ve got little bumps (debossed or embossed, we’re not sure which is which) on top to further stick you to your deck. Guaranteed to smell like grease.

    Our hardware comes with a hex key and is available in three sizes!

    1”
    1.25”

    What’s in the box? 8 bolts, 8 nuts, and a wrench.

    Packaging may vary.

  • Loaded – Button Head – Hardware

    $9.99CAD

    Loaded – Button Head – Hardware

    The strongest bolts in the world. Period.

    Based on research into steel technology and tons of testing, we’ve built the strongest bolts ever. These things don’t break. Guaranteed.

    These button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.

    Our hardware comes with a hex key and is available in three sizes!

    1”
    1.25”
    1.5″
    What’s in the box? 8 bolts, 8 nuts, and a hex key to tighten them down.

    Packaging may vary.

  • Paris – Skate Tool – Black

    $24.99CAD

    Paris Truck Co – Compact Portable Multi-Tool Skate Tool – Black Metal

    Specifications:

    • 3/8″ Hardware Socket
    • 9/16″ Kingpin Nut Socket
    • 1/2″ Axle Nut Socket
    • 1/8″ Allen Wrench
    • #2 Phillips-Head
  • Seismic – Defcon Standard .75 Tall Barrel – Bushings

    $17.99CAD

    Seismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) – Bushings

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Tall 0.75-inch (19mm): Optimal height for most specialty race trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    73A – Cloud White
    77A – Sunray
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape
    97A – Midnight

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

  • Seismic – Defcon Standard .75 Tall Barrel Bushings – Bundle Pack

    $79.99CAD

    Seismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) Bushings – Bundle Pack

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Tall 0.75-inch (19mm): Optimal height for most specialty race trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    Includes:
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

  • Seismic – Defcon Standard .65 Medium Barrel Bushings – Bundle Pack

    $69.99CAD

    Seismic Skate – Defcon Standard Medium Barrel 0.65-inch (16.5mm) Bushings – Bundle Pack

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Medium 0.65-inch (16.5mm): Optimal height for most modern longboard trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    Includes:
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

  • Seismic – Defcon Standard .65 Medium Barrel – Bushings

    $15.99CAD

    Seismic Skate – Defcon Standard Medium Barrel 0.65-inch (16.5mm) – Bushings

    Seismic® Defcon™ Barrel Bushings
    Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
    Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
    Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.

    A major step forward in bushing performance…
    • Deeper lean and truer, more fluid steering with less lateral hanger slop!
    • Highly-energetic yet smooth and controlled return-to-center
    • Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
    • Smoother, more linear resistance profile – Consistent feel • Advanced control

    Fine-tuned dimensions for high-performance fit!
    • Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
    • Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
    • Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
    • Medium 0.65-inch (16.5mm): Optimal height for most modern longboard trucks. May fit and perform best without bottom / boardside washer (usually not needed).

    73A – Cloud White
    77A – Sunray
    81A – Sky Blue
    84A – Bubblegum
    87A – Mango
    90A – Mint
    93A – Grape
    97A – Midnight

    Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

  • Seismic – Split Angled Wedges – Risers

    $21.99CAD

    Seismic Skate – Split Angled Wedges – Truck Risers

    Precision-Machined • Ultra-Low Profile • Easy to Stack!

    Package of one (1) 3-degree Riser and one (1) 7-degree Riser.

    Packaged in pairs of one (1) 3-degree Riser and one (1) 7-degree Riser, with an advanced feature set never before seen in combination…
    • Thin ends reduced to 0.5mm-thickness for lowest-possible profile.
    • Mounting hole dimensions highly optimized for easy stacking. No more bent bolts from riser hole misalignment!*
    • Biomimetic “honeycomb” structure maximizes support with minimal material.
    • CNC-machined from tough composite with superior dimensional stability. Highly resistant to deformation from extreme loads and impacts.

  • 88 Wheel Co – Gummies Barrel Bushings Belligerent Blackberry Hard – 95A

    $13.99CAD

    88 Wheel Co – Gummies Barrel Bushings Belligerent Blackberry Hard – 95A

    Sold in packs of two so you can mix and match durometer for your perfectly tuned setup. Comes with 2 flat washers.

    Diameter – 25mm
    Height – 15mm
    Durometer – 95A Super High Rebound
    Weight – 27.4g / 0.97oz

  • 88 Wheel Co – Gummies Barrel Bushings Lucid Lemon Medium – 90A

    $13.99CAD

    88 Wheel Co – Gummies Barrel Bushings Lucid Lemon Medium – 90A

    Sold in packs of two so you can mix and match durometer for your perfectly tuned setup. Comes with 2 flat washers.

    Diameter – 25mm
    Height – 15mm
    Durometer – 90A Super High Rebound
    Weight – 27.4g / 0.97oz

  • 88 Wheel Co – Gummies Barrel Bushings Wavy Watermelon Super Soft – 80A

    $13.99CAD

    88 Wheel Co – Gummies Double Barrel Bushings Wavy Watermelon (Super Soft) – 80A

    Sold in packs of two so you can mix and match durometer for your perfectly tuned setup. Comes with 2 flat washers.

    Diameter – 25mm
    Height – 15mm
    Durometer – 80A Super High Rebound
    Weight – 27.4g / 0.97oz

  • Riptide – Slab – Footstop

    $31.99CAD

    Riptide Footstop SLAB Urethane Downhill Longboarding Toestop

    Riptide SLAB Custom 60d Urethane Longboard footstops are light weight, durable, and come with 3 Delrin disks so that you can customize both the angle and the height to your personal fit. Riptide Slab foot stop developed jointly with Ambroise Trauet (record holder for the fastest toeside stand up slide in the world with 117.35Km/h). Currently available in Black, Purple, Wine Red, Orange, Green, Pink, Yellow, Blue.

    Individually sold and includes –

    ⦁ SLAB Footstop
    ⦁ Three (3) Delrin disks to adjust height and angle
    ⦁ Tiny washer
    ⦁ 1.75″ Bolt & Nut
    ⦁ Custom 60d Urethane
    ⦁ Durable
    ⦁ Height 1.3″
    ⦁ Width 2.75″
    ⦁ Lightweight 1.6 oz / 46 gm

    The longer bolt and 3 delrin disks allow you to edit the height of the footstop off your board for foot comfort.

  • Boa – Black Belly Ceramic – Bearings

    $99.99CAD

    Boa Wheels – Black Belly Ceramic – Skateboard Bearings

    The Boa Blackbelly Ceramic Bearings are the last set of bearings you’ll ever need to buy. We are so confident you’ll love them that we back them up with a lifetime warranty.

    Featuring ultra strong silicon nitride ceramic balls that will resist corrosion and shattering for a lifetime of usage. The bearing housing is made of a corrosion treated steel and features rubber seals to keep moisture and dirt out. Each bearing is filled with a nano ceramic grease that helps keep the bearings running at their optimum.

    With inbuilt spacers and speed rings, you won’t have to worry about losing them ever again, or messing with alignment of your spacers.