- No products in the cart.
Riptide – Krank Bushings – Short Street Barrel
$12.99CAD
Sold as Pair with Small Flat Washers and a Sticker.
Available Durometers: 84a (orange), 87a (white), 90a (green), 93a (wine red), 96a (grey),
Share on:
Description
Description
Sold as Pair with Small Flat Washers and a Sticker.
The ShortStreetBarrel / StreetBarrel setup is for those looking for higher stability at higher speeds but still highly maneuverable.
.975″ Dia x .40″ High (24.8mm Dia x 10.2mm High)
Harder KranK durometer bushings (96a & 93a) for heavier-weight riders (over 140lbs) as harder durometer bushings allow for a nice tight set-up
Medium durometer bushings (90a – 87a) are for medium-weight riders (100 – 140lbs)
Softer KranK durometer bushings (84a) are best for lightweight riders (50 – 100lbs) as well as for those looking for a looser setup in the RoadSide position when coupled with a harder duro bushing
PLEASE NOTE: The KranK Formula has quite a bit of adjustability – so order accordingly! You can tighten the kingpin nut up to two full turns to ‘harden’ or ‘loosen’ the duro.Additional information
Additional information
Weight 2 lbs Dimensions 2 × 2 × 2 in Riptide Durometer krank 84a (orange), 87a (white), 90a (green), 93a (wine red), 96a (grey)
Related Products
Orangatang – Nipples Bushings
$21.99CADIs it cold in here or are you just sporting some perky bushings? Stuff these chubby puppies into your trucks and get ready to bounce out of every carve with tons of energy and rebound. Poured with our extra lively and energetic Randy Urethane, which we came upon while testing wheels but had slide characteristics that were a bit hmmmmm . . . premature? Too eager for a wheel, but just excitable enough to squeeze between your washers.
Sold as a set of four (4), including four thin and strong flat washers. Nipples are NOT recommended for every truck on the market, but they do work well with Paris, Tracker Fastracks and Randals (among others).
Bones Super Reds Bearings
$37.99CADFeatures
Features Higher quality steel races, better quality and grade balls, and a superior surface finish.
Single, non-contact, removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream™ racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
Instructions
StickerZealous – Ceramic Bearings
$39.99CADZealous downhill Ceramic precision Spaced longboard Bearings
Ceramic Balls
-Ceramic balls are lighter, stiffer, smoother and naturally corrosion resistant. This means we can use a lower viscosity lubricant which makes them fast right out of the tube.
– Precision 8mm axle holes
– .4045″ built in spacers
– .5mm built in speedrings
– Strengthened Nylon Ball Retainers
– White rubber seals to keep dirt and debris on the outside of the bearing.
– Lubed with Custom Nanoceramic Grease
-The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
-Corrosion on the inside of the bearing is nearly eliminated.Sold in sets of 8 bearings.
