Rocket Longboards – Rhino Racetail – Deck

Description

Rocket Longboards – Rhino Racetail – Downhill Skateboard Deck

We believe that more innovation is needed in the development and construction of longboards. And we try to set a good example. For years there have been two ways for wedging the rear foot. Either you use a torque block or you ride a board with a wedge pressed into the back. However, the torque block is difficult to attach and you stand on a soft foam. In addition, it generates a kink at the transition between the board and the foam. Boards with a pressed wedge have a smoother transition and you have direct contact with the board. But you need wedges to bring the rear truck back to 0° and longer hardware is also necessary. That makes things a bit complicated again.

To solve all these problems we developed the Rhino Racetail. The largest part of the board consists of 7 layers of maple and is reinforced with fibers. In the rearmost part, another 6 layers are additionally pressed in between. This results in a very natural feeling wedge in the board. And don’t worry, we kept the thick part to a minimum. So you hardly feel any additional weight.

All this results in the perfect racing machine for us. No foam, just direct board contact. Plastic wedges are no longer necessary. And because the holes are drilled wider at the top, no longer hardware is needed. This is the most direct and effortless connection between board and truck. And the transition to the racetail is also absolutely fluid.

The Rhino is also available in the standard version and with a Kicktail.

SPECIFICATIONS:
LENGTH – 30” / 76.2 cm
WIDTH – 8.5’’ / 21.6 cm
WHEELBASE – 18.8″ – 21.6″ / 47.7 – 54.9 cm
CONCAVE – Elliptical / 0.4’’ / 10 mm
MATERIAL – SFI-certified Canadian maple, Carbon fiber, Glass fiber, Embossed ABS topsheet