- No products in the cart.
Search Results for: paris
standard
Pantheon – Tandava 2 Green 7-Ply – Deck
Pantheon Longboards – Tandava 2 Green 7-Ply – Dancing Deck
The Pantheon Tandava 2 is a mid-sized dancer longboard featuring clean lines, a comfortable platform and flex, and a flowing shape that assists in its durability. Slight revisions over the original Tandava have taken place in an effort to make the Tandava 2 just a touch more trick-friendly and a little easier on the wallet. Slightly longer and wider kicktails add just a bit more leverage and pop. New grip design features a grip=free center platform for easy dance steps and a little gnarlier grip toward the kicktails for better aerial maneuver control. The new Tandava features an all maple and fiberglass construction, placing the fiberglass directly underneath the top and bottom layers of maple. In comparison to the original, this significantly lowers the cost, because we got rid of that fancy (expensive) veneer, at no loss to its strength or functionality! We also gave the Tandava 2 flex options! You can choose between the 7-ply green and the 6-ply purple.
One thing many dancer longboards tend to suffer from is durability issues. Many expensive boards get beefed up around the rails at one of the “hot spots” around the deck, often near the wheel well. This is because designers are shaping the decks in such a way that the board has specific spots that it tends to land on over and over and over again–almost like a “swell-bow” on your arm just sticks out and just can’t help but to be landed on every time you go down. The Tandava 2 is a dancer longboard that was built from the ground up–now refined over time–with a mold that specifically works with the shape to avoid these hot spots, so that the board can wear more evenly over time. This functional design results in a longer lasting board for hard riders.
Combine our carefully shaped longboard dancing platform with a proven construction of fiberglass and Canadian maple, and you’ve got a strong, durable board that can take hits and keep on going. We put the maple on the outside of the deck so that as the board wears, you don’t end up with fiberglass shards in your hands–a common problem for dancer skaters doing hand tricks.
Definitely not to be overlooked, the Tandava 2 dancer features a very comfortable dancing platform with a low concave that ever-so-gradually increases toward the tip and tail until it reaches a bowl-shaped nose and tail kick. This kick is crazy comfortable for manuals and provides a killer board feel with kicking the board up and doing aerial maneuvers. Set this board up with some flowy 180mm, 50-degree trucks and lightweight wheels as we have here with the 180mm Paris trucks and Seismic Tantrum wheels, and then turn on some jams and let the music and this beautiful Tandava dancer longboard move you!
Length: 45.75 inches
Width: 9.25 inches
Wheelbase: 28.66″, 29.91″
Profile: Mild Camber
Concave: Mild in the body, Bowls in the tails
Construction: Triaxial Fiberglass under outer layers of maple
standard
Pantheon – Tandava 2 Purple 6-Ply – Deck
Pantheon Longboards – Tandava 2 Purple 6-Ply – Dancing Deck
The Pantheon Tandava 2 is a mid-sized dancer longboard featuring clean lines, a comfortable platform and flex, and a flowing shape that assists in its durability. Slight revisions over the original Tandava have taken place in an effort to make the Tandava 2 just a touch more trick-friendly and a little easier on the wallet. Slightly longer and wider kicktails add just a bit more leverage and pop. New grip design features a grip=free center platform for easy dance steps and a little gnarlier grip toward the kicktails for better aerial maneuver control. The new Tandava features an all maple and fiberglass construction, placing the fiberglass directly underneath the top and bottom layers of maple. In comparison to the original, this significantly lowers the cost, because we got rid of that fancy (expensive) veneer, at no loss to its strength or functionality! We also gave the Tandava 2 flex options! You can choose between the 7-ply green and the 6-ply purple.
One thing many dancer longboards tend to suffer from is durability issues. Many expensive boards get beefed up around the rails at one of the “hot spots” around the deck, often near the wheel well. This is because designers are shaping the decks in such a way that the board has specific spots that it tends to land on over and over and over again–almost like a “swell-bow” on your arm just sticks out and just can’t help but to be landed on every time you go down. The Tandava 2 is a dancer longboard that was built from the ground up–now refined over time–with a mold that specifically works with the shape to avoid these hot spots, so that the board can wear more evenly over time. This functional design results in a longer lasting board for hard riders.
Combine our carefully shaped longboard dancing platform with a proven construction of fiberglass and Canadian maple, and you’ve got a strong, durable board that can take hits and keep on going. We put the maple on the outside of the deck so that as the board wears, you don’t end up with fiberglass shards in your hands–a common problem for dancer skaters doing hand tricks.
Definitely not to be overlooked, the Tandava 2 dancer features a very comfortable dancing platform with a low concave that ever-so-gradually increases toward the tip and tail until it reaches a bowl-shaped nose and tail kick. This kick is crazy comfortable for manuals and provides a killer board feel with kicking the board up and doing aerial maneuvers. Set this board up with some flowy 180mm, 50-degree trucks and lightweight wheels as we have here with the 180mm Paris trucks and Seismic Tantrum wheels, and then turn on some jams and let the music and this beautiful Tandava dancer longboard move you!
Length: 45.75 inches
Width: 9.25 inches
Wheelbase: 28.66″, 29.91″
Profile: Mild Camber
Concave: Mild in the body, Bowls in the tails
Construction: Triaxial Fiberglass under outer layers of maple
standard
Loaded Bhangra – One Last Dance
You heard it right… One Last Dance for the Bhangra V2!! It’s sad news for sure, but times have been changing and Loaded has a ready, steady quiver of dance boards still in the line up for us and I am sure they will be coming out with something new as well. Don’t miss out on your last chance to get a V2 Bhangra if you wanted one for yourself. Bhangra not your jam? Check out the Mata Hari, Terab, or maybe you just need a little two step in your life, the Chinchiller. Get all the details! // read more
standard
Loaded – Fathom Complete – 105mm 80a Dad Bods
Loaded X G-Bomb Fathom Complete Zee Bracket Mounting System With Paris 150mm and 105mm 80a Dad Bods Complete
THE LAST MILE (OR EVERY MILE).
Introducing the Loaded Fathom, the longboard that blurs the boundaries of what a skateboard can be.
The Fathom is one of the easiest boards to ride in the world and a ton of fun. Built around the new Loaded Zee Bracket truck mounting system. With large wheels and a low ride height, the Fathom reimagines soulful commuting and urban exploration.
IT’S RIGHT FOR YOU IF…
You want a compact board that’s easy and fun to ride—for novices and seasoned skaters alike.
You’re looking for a low ride height for effortless pushing and footbraking and a wide deck that provides a forgiving, stable platform.
You appreciate having huge wheels that coast forever and plow over bumps and cracks.
LONGBOARD SPECS
• Length: 33″ / 83.8 cm (complete), 23″ / 58.4 cm (deck)
• Width: 9.25″ / 23.5 cm
• Wheelbase: 26.5″ / 67.3 cm (complete), 17.25″ / 43.8 cm (deck)
• Profile: slight camber
• Flex: subtle
• Weight: 9.6 lb / 4.4 kg (Dad Bod), 8.4 lb / 3.8 kg (Caguama), 3.1 lb / 1.4 kg (deck)
• Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.
COMPLETE SETUP
• Bracket: Loaded Zee Bracket (NEW)
• Trucks: Paris V2 150mm 50° (raw)
• Wheels: Orangatang 105mm Dad Bod (80a, orange)
• Bearings: Loaded Jehu V2
• Hardware: Loaded (two sets: 1.25″ at deck, 1″ at trucks)
SPEED
The Fathom is built for speed and momentum. With its large (up to 105mm) wheels and agile trucks, this board bridges the gap between board and bike, easily reaching and sustaining commuting speeds that surpass the comfort zone of conventional skateboards. Get a good workout, explore the roads less traveled, or get to class/work without breaking a sweat. It’s up to you.
CONTROL
The Fathom is stable and easy to control, even at high commuting speeds. The low ride height provides stability and ease of pushing and footbraking. The wide deck further enhances confidence, while upturned deck corners reduce the chance of footbite.
FUN
Double-drop brackets and relatively narrow trucks make this board surprisingly responsive and agile. A board with wheels this size has no right to turn this well.
TWO SETUPS
Includes Paris 150mm trucks and your choice of 105mm Dad Bod (80a orange) or 85mm Caguama (77a blue) wheels. The Dad Bod setup is a blast to ride, carries massive momentum, and can go over anything for easy cruising. The Caguama setup is a fun, approachable alternative, providing quick acceleration and a lower stance. Here at Loaded we vastly prefer to ride the Dad Bod setup because of its epic rollover power.
CONSTRUCTION
Featuring 8-ply maple construction, slight camber for road-smoothing suspension, and lifted corners (with more aggressive grip tape) to lock in your feet and reduce the chance of foot bite. Large enough for comfort but compact enough to carry on public transportation and stow under your desk.
GRAPHIC
To evoke the spirit of adventure and exploration, the current graphic was inspired by the historic Polynesian expansion and their mind-boggling ocean navigation. Nanastudio created this collage based on Polynesian ships and artifacts.
Built around the Zee Bracket
This proprietary composite bracket (designed exclusively for Loaded by our friends, the wizards at G/Bomb Skateboards) allows us to build unique and functional next-gen skate vehicles with double-drop (drop-through and drop-down) truck mounting.
Zee Bracket Dimensions:
Length: 8.25″ / 21.0 cm
Width: 3.25″ / 8.26 cm
Height: 2.25″ / 5.72 cm
Weight (pair): 0.875 lb / 0.4 kg
Two Zee Brackets add 9.25″ / 23.5 cm to deck wheelbase
Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.
standard
Loaded Fathom – For the Last Mile (Or Every Mile)
Flatspot has always been a fan of the push! Maybe you’ve heard? #WalkingIsForChumps! From commuting around town to long paths in the woods of North Vancouver, we even skated across a country. We just love to be out on a board. Over the years we’ve tried a lot of things. We chased those long treks on Demonseeds, we snubbed up 35 inch switchblades with tkps, and we’ve been cutting custom platform decks for brackets for as long as there have been brackets. Having the gear that makes your distance melt away makes all the difference. There really isn’t a need to struggle with that anymore. Introducing the Loaded Fathom and G-Bomb Zee Bracket. Loaded has worked to offer a new light weight, super strong, cost effective bracket system that lets you use easy to access parts like Paris Trucks and Orangatang wheels.. and the Loaded Fathom platform of course!… to build a personalized setup thats going to keep you pushing and pumping all day long. We’ll make another post to go into more details about the Zee bracket itself and all the DIY options, but lets look at the full package, the Loaded Fathom Complete option, first! // read more
standard
Seismic – Defcon Standard .60 Short Barrel – Bushings
Seismic Skate – Defcon Standard Short Barrel 0.60-inch (15mm) – Bushings
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.
Seismic’s Defcon ultra-high-rebound urethane has a remarkable set of unique and highly-advanced properties – and now we’ve applied it to bushings! Defcon is the fastest wheel formula in the history of skateboard racing – credited with virtually every significant world distance and speed record, including the official Guinness Standup mark. (Pete Connolly, 91.17 mph / 146.73 kph – Sept. 16, 2017, at The Top Speed Challenge in Quebec, Canada.)
A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced control
Fine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Three precision-fit heights…
– Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)
– Medium 0.65-inch (16.5mm): Optimal height both BS and RS for brands including Aera, Carver, and Sabre. Also fits well both BS and RS in many modern trucks where BS washers are optional or omitted. (e.g., Dont Trip Poppy / Slalocybin) If paired with a shorter bushing, fits well in many trucks assembled with BS washers. (e.g., Bear, Caliber, Paris) Fits same trucks both BS and RS if BS washer is removed.
– Tall 0.75-inch (19mm): Optimized fit both BS and RS in many modern race trucks. (e.g., Exile, Rogue, Ronin, Skoa, Valkyrie, Zealous, Dont Trip Boomer / DH-Cybin / Haki / Molly) Also fits BS in Caliber trucks if shim is removed.
73A – Cloud White
77A – Sunray
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – Grape
97A – Midnight
Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
standard
Seismic – Defcon Standard .60 Short Barrel Bushings – Bundle Pack
Seismic Skate – Defcon Standard Short Barrel 0.60-inch (15mm) Bushings – Bundle Pack
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.
Seismic’s Defcon ultra-high-rebound urethane has a remarkable set of unique and highly-advanced properties – and now we’ve applied it to bushings! Defcon is the fastest wheel formula in the history of skateboard racing – credited with virtually every significant world distance and speed record, including the official Guinness Standup mark. (Pete Connolly, 91.17 mph / 146.73 kph – Sept. 16, 2017, at The Top Speed Challenge in Quebec, Canada.)
A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced control
Fine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Two precision-fit heights…
– Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)
– Medium 0.65-inch (16.5mm): Optimal height both BS and RS for brands including Aera, Carver, and Sabre. Also fits well both BS and RS in many modern trucks where BS washers are optional or omitted. (e.g., Dont Trip Poppy / Slalocybin) If paired with a shorter bushing, fits well in many trucks assembled with BS washers. (e.g., Bear, Caliber, Paris) Fits same trucks both BS and RS if BS washer is removed.
– Tall 0.75-inch (19mm): Optimized fit both BS and RS in many modern race trucks. (e.g., Exile, Rogue, Ronin, Skoa, Valkyrie, Zealous, Dont Trip Boomer / DH-Cybin / Haki / Molly) Also fits BS in Caliber trucks if shim is removed.
Includes:
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – Grape
Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
standard
Loaded – Fathom Platform – Deck
Loaded – Fathom Platform – Deck
* Platform Deck only, Not a complete. Will need additional parts to complete.
THE LAST MILE (OR EVERY MILE).
Introducing the Loaded Fathom, the longboard that blurs the boundaries of what a skateboard can be.
The Fathom is one of the easiest boards to ride in the world and a ton of fun. Built around the new Loaded Zee Bracket truck mounting system. With large wheels and a low ride height, the Fathom reimagines soulful commuting and urban exploration.
IT’S RIGHT FOR YOU IF…
You want a compact board that’s easy and fun to ride—for novices and seasoned skaters alike.
You’re looking for a low ride height for effortless pushing and footbraking and a wide deck that provides a forgiving, stable platform.
You appreciate having huge wheels that coast forever and plow over bumps and cracks.
LONGBOARD SPECS
• Length: 23″ / 58.4 cm (deck)
• Width: 9.25″ / 23.5 cm
• Wheelbase: 17.25″ / 43.8 cm (deck)
• Profile: slight camber
• Flex: subtle
• Weight: 3.1 lb / 1.4 kg (deck)
CONSTRUCTION
Featuring 8-ply maple construction, slight camber for road-smoothing suspension, and lifted corners (with more aggressive grip tape) to lock in your feet and reduce the chance of foot bite. Large enough for comfort but compact enough to carry on public transportation and stow under your desk.
GRAPHIC
To evoke the spirit of adventure and exploration, the current graphic was inspired by the historic Polynesian expansion and their mind-boggling ocean navigation. Nanastudio created this collage based on Polynesian ships and artifacts.
RECOMMENDED COMPLETE SETUP
• Bracket: Loaded Zee Bracket (NEW)
• Trucks: Paris V2 150mm 50° (raw)
• Wheels: Orangatang 105mm Dad Bod (80a, orange) or 85mm Caguama (77a, blue)
• Bearings: Loaded Jehu V2
• Hardware: Loaded (two sets: 1.25″ at deck, 1″ at trucks)
standard
Loaded – Fathom Complete – 85mm 77a Caguama
Loaded X G-Bomb Fathom Complete Zee Bracket Mounting System With Paris 150mm and 85mm 77a Caguama Complete
THE LAST MILE (OR EVERY MILE).
Introducing the Loaded Fathom, the longboard that blurs the boundaries of what a skateboard can be.
The Fathom is one of the easiest boards to ride in the world and a ton of fun. Built around the new Loaded Zee Bracket truck mounting system. With large wheels and a low ride height, the Fathom reimagines soulful commuting and urban exploration.
IT’S RIGHT FOR YOU IF…
You want a compact board that’s easy and fun to ride—for novices and seasoned skaters alike.
You’re looking for a low ride height for effortless pushing and footbraking and a wide deck that provides a forgiving, stable platform.
You appreciate having huge wheels that coast forever and plow over bumps and cracks.
LONGBOARD SPECS
• Length: 33″ / 83.8 cm (complete), 23″ / 58.4 cm (deck)
• Width: 9.25″ / 23.5 cm
• Wheelbase: 26.5″ / 67.3 cm (complete), 17.25″ / 43.8 cm (deck)
• Profile: slight camber
• Flex: subtle
• Weight: 9.6 lb / 4.4 kg (Dad Bod), 8.4 lb / 3.8 kg (Caguama), 3.1 lb / 1.4 kg (deck)
• Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.
COMPLETE SETUP
• Bracket: Loaded Zee Bracket (NEW)
• Trucks: Paris V2 150mm 50° (raw)
• Wheels: 85mm Caguama (77a, blue)
• Bearings: Loaded Jehu V2
• Hardware: Loaded (two sets: 1.25″ at deck, 1″ at trucks)
SPEED
The Fathom is built for speed and momentum. With its large (up to 105mm) wheels and agile trucks, this board bridges the gap between board and bike, easily reaching and sustaining commuting speeds that surpass the comfort zone of conventional skateboards. Get a good workout, explore the roads less traveled, or get to class/work without breaking a sweat. It’s up to you.
CONTROL
The Fathom is stable and easy to control, even at high commuting speeds. The low ride height provides stability and ease of pushing and footbraking. The wide deck further enhances confidence, while upturned deck corners reduce the chance of footbite.
FUN
Double-drop brackets and relatively narrow trucks make this board surprisingly responsive and agile. A board with wheels this size has no right to turn this well.
TWO SETUPS
Includes Paris 150mm trucks and your choice of 105mm Dad Bod (80a orange) or 85mm Caguama (77a blue) wheels. The Dad Bod setup is a blast to ride, carries massive momentum, and can go over anything for easy cruising. The Caguama setup is a fun, approachable alternative, providing quick acceleration and a lower stance. Here at Loaded we vastly prefer to ride the Dad Bod setup because of its epic rollover power.
CONSTRUCTION
Featuring 8-ply maple construction, slight camber for road-smoothing suspension, and lifted corners (with more aggressive grip tape) to lock in your feet and reduce the chance of foot bite. Large enough for comfort but compact enough to carry on public transportation and stow under your desk.
GRAPHIC
To evoke the spirit of adventure and exploration, the current graphic was inspired by the historic Polynesian expansion and their mind-boggling ocean navigation. Nanastudio created this collage based on Polynesian ships and artifacts.
Built around the Zee Bracket
This proprietary composite bracket (designed exclusively for Loaded by our friends, the wizards at G/Bomb Skateboards) allows us to build unique and functional next-gen skate vehicles with double-drop (drop-through and drop-down) truck mounting.
Zee Bracket Dimensions:
Length: 8.25″ / 21.0 cm
Width: 3.25″ / 8.26 cm
Height: 2.25″ / 5.72 cm
Weight (pair): 0.875 lb / 0.4 kg
Two Zee Brackets add 9.25″ / 23.5 cm to deck wheelbase
Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.
standard
Loaded X G-Bomb Zee Bracket Mounting System
Loaded X G-Bomb Zee Bracket Mounting System
MAKE YOUR OWN MAGIC CARPET.
Create your own low-riding skateboard longboard for next-level urban adventures.
Designed exclusively for Loaded by our friends, the wizards at G/Bomb Skateboards, the Zee Brackets are a game-changing innovation that allows us to create a new generation of low-riding performance vehicles and allows you to create your low-riding masterpiece.
Share your DIY Zee Bracket creations with the hashtag #LoadedZeeBracket!
Contents: two (2) Zee Brackets, eight (8) O-rings
Features:
Lowers ride height by about 1.5″ / 3.8 cm compared to a top mounted skateboard
Big Wheels: accommodates wheels between 75 and 105 mm with no wheelbite
Super Stiff: made from fiber-reinforced automotive-grade resin
Vibration Damping: Eight urethane O-ring vibration dampers (four per bracket)
Trucks: Works with a variety of trucks between 150 and 180 mm. Reverse Kingpin (like Paris, Bear, Caliber) recommended. Works with standard street decks using existing truck mounting holes.
Recommended equipment:
Big Wheels (75-105mm)
Reverse Kingpin Trucks (150-180mm)
Bearings
Skate Hardware (two sets)
Griptape
Deck: Create your own deck out of an old street deck, a longboard deck, an old snowboard, a plank of wood, your mom’s priceless coffee table, etc.
Dimensions:
Length: 8.25″ / 21.0 cm
Width: 3.25″ / 8.26 cm
Height: 2.25″ / 5.72 cm
Weight (pair): 0.875 lb / 0.4 kg
Two Zee Brackets add 9.25″ / 23.5 cm to deck wheelbase
Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.